#author("2020-09-24T02:25:17+00:00","","") #topicpath //////////////////////////////////////////////////////////////////////////////// * 目次 [#m646edfe] //////////////////////////////////////////////////////////////////////////////// * CPUの監視 [#fbc9e108] - 温度・ファン回転数をモニタする ** パッケージ [#t4fe231c] - debian では、以下のパッケージを使用する -- lm-sensors -- libsensors4 (それぞれのアーキテクチャに分かれている) -- xsensors (Xのグラフィカルな画面で表示させたい場合に使用) ** 実行 [#r8c505f9] - 以下で確認が出来る: [kazu@novak:0 ~]$ sensors acpitz-virtual-0 Adapter: Virtual device temp1: +44.0°C (crit = +127.0°C) temp2: +40.0°C (crit = +104.0°C) thinkpad-isa-0000 Adapter: ISA adapter fan1: 0 RPM temp1: +44.0°C temp2: +41.0°C temp3: N/A temp4: +45.0°C temp5: +32.0°C temp6: N/A temp7: +31.0°C temp8: N/A temp9: +45.0°C temp10: +41.0°C temp11: N/A temp12: N/A temp13: N/A temp14: N/A temp15: N/A temp16: N/A coretemp-isa-0000 Adapter: ISA adapter Core 0: +40.0°C (high = +105.0°C, crit = +105.0°C) Core 1: +40.0°C (high = +105.0°C, crit = +105.0°C) //////////////////////////////////////////////////////////////////////////////// * CPU fan の制御 [#j6f87d71] - デバイスの確認 # sensors-detect Driver `coretemp': * Chip `Intel digital thermal sensor' (confidence: 9) To load everything that is needed, add this to /etc/modules: #----cut here---- # Chip drivers coretemp #----cut here---- If you have some drivers built into your kernel, the list above will contain too many modules. Skip the appropriate ones! Do you want to add these lines automatically to /etc/modules? (yes/NO)yes Successful! Monitoring programs won't work until the needed modules are loaded. You may want to run '/etc/init.d/kmod start' to load them. Unloading i2c-dev... OK Unloading cpuid... OK //============================================================================== ** 参考リンク [#z5d47cac] - [[ファンスピード制御 - ArchWiki>https://wiki.archlinux.jp/index.php/%E3%83%95%E3%82%A1%E3%83%B3%E3%82%B9%E3%83%94%E3%83%BC%E3%83%89%E5%88%B6%E5%BE%A1]]